TLR 8ight-X Elite Buggy 1:8 Race Kit

Poštovné ZDARMA
Výrobce:
Team Losi Racing
Kategorie:
Kód produktu:
#TLR04010
Vaše cena:
779,60 €
Dostupnost:
dostupný 1 ks, Odesíláme 7. 7.
Bude doručeno:
Česká republika8. 7.

The Team Losi Racing 8IGHT-X ELITE buggy builds on the championship-winning heritage of its predecessors with updates to the suspension geometry and drivetrain as well as the chassis layout that make it both easier to drive and tougher to beat.

7075 3MM ALUMINUM CHASSIS

A new ELITE chassis that moves weight forward and decreases wheelbase is included to give the car more overall grip. Chassis width has been increased from the 4.0 to X to aid in stability and give the buggy a more neutral feel.

UPDATED REAR CVAS

The 8IGHT-X ELITE will include rear CVAs with an updated axle and shaft providing more overall rear grip to the car and better tracking through the bumpy conditions.

FRONT UNIVERSALS INCLUDED

The 8IGHT-X ELITE will includes updated universals for the front which makes the car smoother existing turns and aids in the flow in bumpy track conditions.

UPDATED RADIO TRAY

An updated radio tray now puts the throttle servo near the engine to eliminate additional linkage. The updated radio tray will ensure the throttle servo is rigidly mounted to avoid any flex by floating the servo off of the center differential.

ALUMINUM FRONT BRACE

The 8IGHT-X ELITE includes an updated aluminum front brace that provides smoother steering response.

+1 HEXES

Updated +1mm width hexes are included for the rear of the 8IGHT-X ELITE to add stability in high speed turns.

TWO WINGS AND WING RISER

The 8IGHT-X ELITE includes updates to both the Ifmar wing as well as our polycarbonate wing. We also include a 10mm wing riser for added rear grip.

ONE PIECE QUICK CHANGE ENGINE MOUNT 

The 8IGHT-X ELITE includes our option quick change one piece version of the engine mount for easier maintenance.

STEERING RACK

The steering rack allows more ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads.

BLEEDER SHOCK CAPS

Updated machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil. New bladders are also included for better bump handling.

SUSPENSION ARMS

Webbing added between inner mounting tabs to ensure hinge pin fitment. Mold updated to increase strength. Suspension arms have been designed to accept stiffener plates that will allow racers to tune the flex of the suspension. The Elite Kit will include both molded plates and carbon plates.

SHOCK TOWERS

Machined 7075-T6 aluminum shock towers with updated camber link holes previously included with the 8XE.

BETTER DIFF ACCESS

The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle. The front diff case has been updated to allow better fitment of the front arms while the rear case has been updated to increase the strength of the area holding the shock tower.

OPTIMIZED SHOCKS

The 8IGHT-X shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car as well as offer the use of both 3.5mm and 4.0mm shock shafts.

CAB FORWARD STYLE BODY

A cab forward design helps with overall down force, which improves steering and overall stability. Cut lines have been updated for ease of installation and changing of settings.

EQUALIZED DRIVELINE

The center drive shaft angles have been modified so they are equal front to rear allowing for a more 4wd feel to the vehicle.

IMPROVED SUSPENSION GEOMETRY

The 8IGHT-X next generation suspension geometry has been completely revamped making a car that is fast, nimble, and easy to drive. This includes a myriad of updates including longer front and rear arms, wider front pivot with less scrub radius, narrower rear pivot, and updated hub offset.

LARGER PINION BEARING

The pinion bearing size inside the front and rear gear boxes has been increased for added durability.

ADJUSTABLE CASTER BLOCKS

17.5 degree caster blocks are included that allow the height of the spindle to be adjusted up and down for more or less high speed stability.

SWAY BAR SYSTEM

Sway bar system that has collars that eliminate side to side play to provide a more consistent suspension package.

CHASSIS SIDE GUARDS

The chassis side guards have an improved fit onto the chassis.

Specifications:
TypeBuggy
Scale1/8
Length19.4 In (494mm)
Width12.1 In (308mm)
Height7.1 In (180mm)
Ground Clearance2.4 In (60mm)
Wheelbase12.8 In - 13 In (326mm-329mm)
WeightVaries
Chassis3mm, 7075 T-6 Aluminum, Hard Anodized
SuspensionIndependent
Drivetrain4WD
Motor or EngineEngine Not Included-Design Fits .21-.31 Size Engine
Gear PitchMOD1
Wheel SizeDish Type, 3.3" (83.5mm) Diameter, 1.7" (42mm) Width
Kit/RTRKit
Shock TypeAluminum Oil Filled
Body8XE Unpainted
Ball BearingsYes
Fuel Tank Capacity125CC (4.2oz)
Experience LevelAdvanced
Recommended EnvironmentOutdoor
Assembly Time3-5 Hours
Is Assembly RequiredYes

Required to Complete:
  • Dynamite® Fast Fill Fuel Bottle, 500cc (DYN2003) 
  • Dynamite® 7.4V 3200MAh Li-Ion RX pack (DYNB0510) 
  • Dynamite® Prophet™ Sport LiPo 35W AC Charge (DYNC2005CA) 
  • Dynamite® Nitro Engine Heater 12V DC (DYNE1600) 
  • Dynamite® Shock Shaft Pliers/Multi-Tool (DYNT1260) 
  • Losi® Nitrotane Race 30%, Quart (LOSF0430) 
  • Spektrum™ DX6R 6-Channel DSMR Android-Powered Radio System with WiFi/Bluetooth (SPM6410)
  • Spektrum™ S6390BL 1/8 Scale Brushless High Speed/Torque, HV Digital Servo (SPMSS6390BL)
Loading...