RC Maker Brass Servo Weight (Type 2)

Fabricante:
RC Maker
Categoría:
Código de producto:
#RCM-SW2
Su precio:
14,90 €
Disponibilidad:
no está en el almacén

This weight is Type 2 style, and has a flat face with no wire route.

RC Maker Servo weight adds weight behind the servo, which is a very convenient place when looking for places to add weight on your car! It's floating off the servo which ensures it has no impact on the flex of your chassis.

It fits a wide range of applications such as 1/10th EP & GP Touring, 1/10th F1, 1/10th Offroad (2wd & 4wd), 1/8th Onroad & GT and basically any application using a standard size servo!

All weights come pre-installed with super thin double sided tape. Make sure you give the surface of your servo a good wipe with cleaning alcohol or motor-spray before installing!

Specifications:
  • Weight 18g for changing weight bias or balancing your chassis
  • Sits off the chassis as to not interfere with flex
  • Suits a wide range of applications using a standard size servo (40mm x 20mm)
  • Pre-applied 0.2mm Thick Ultra Sticky Double Sided Tape
  • CNC Machined in Australia from locally sourced brass
Loading...