XRAY RX8'23 - 1/8 Luxury Nitro On-Road Car

Envío GRATIS
Fabricante:
XRAY
Categoría:
Código de producto:
#340009
Su precio:
929,90 €
Disponibilidad:
no está en el almacén
2023 All New Features:
  • All-new chassis with narrowed front suspension pivots increases stability & traction
  • More chassis cutouts create greater flex in desired locations
  • Additional chassis cutouts improve engine cooling
  • Hard composite suspension arms combined with the improved central chassis flex keeps the suspension geometry stable while the flex is transferred through chassis and radio plate to maintain traction.
  • Narrower front suspension holders for improved geometry
  • Longer lower suspension arm shock mounting holders compensate for the narrower suspension holders to maintain the ideal shock absorber geometry
  • Lower down-stop mounting holders without the eccentric geometry make the car easier to set suspension down-stops
  • All-new front aluminum bulkheads with a lowered design
  • New front upper clamps feature integrated upper shock mounting positions, eliminating the need for a separate front shock tower
  • Innovative front upper shock mounting directly on the upper clamps adjusted via shims provide more flex on front suspension
  • New front upper bulkhead brace for easy flex adjustments. More stability with the brace installed, more traction and steering when the brace is removed
  • Lightweight front upper arm holder design
  • Ultra-compact and super lightweight receiver box moves the weight lower and closer to the center of the chassis
  • Radio plate with new servo holders moves the throttle servo more rearwards with a more central location for the receiver box
  • Shorter servo saver stand with key lock design
  • Fuel tube holders allows to be mounted directly on the radio plate for a clean look
  • New aluminum rear radio tray holders are super lightweight and reinforced in critical areas to eliminate breakage, using fixed radio tray mounting for improved stiffness
  • Rear suspension holders are mounted to the chassis with 2 larger screws instead of 4 smaller screws for more security
  • Simplified aluminum 2-speed shaft holders eliminate unnecessary braces to make the chassis more flexible, while the wider positioning provide improved support for the 2 speed shaft
  • Pulley bushings are optimized for the fixed position of the pulleys on the 2-speed shaft
  • New rear aluminum bulkheads have a 2mm front/rear wheelbase adjustment for easy traction tuning depending on the track conditions. Front position more traction, rear position more stability.
  • Rear suspension holders and milled pockets in the chassis plate reduce the lowest pin position by 1mm to generate more traction when needed
  • Anti-roll bar bearing bushings front and rear for different thickness of anti-roll bars
  • New anti-roll bar wire shape to match the new bearing bushings
  • Full ventilated brake disk included in the kit
  • 2-speed shaft adapter for rear belt pulley uses longer pins for increased reliability
  • Lightweight one-way carrier for reduced rotating weight
  • New guide pins provide smooth movement of the brake pads
  • Return spring shims improve efficiency of the brake pads by preventing spring lock and maintaining free brake movement
  • New 9mm wider rear PUR belt for increased reliability and lifespan
  • Front lower bumper with new body mount positions to fit all the different racing bodies
  • The aluminum front body posts with eccentric mounting that allows frontward or rearward mounting positions
  • Longer front lower pivot balls account for the narrower front suspension pivot to maintain necessary width adjustments
  • Graphite rear upper arm holders with more clearance above the rear belt

Loading...