Price without VAT (sales tax): 214,80 €
Your price: 259,90 €
· Hobbywing XeRun XR10 PRO 160A Sensored Brushless ESC
· Hobbywing XeRun V10 G2 4.5T Sensored Brushless Motor
Hobbywing XeRun XR10 PRO 160A Sensored Brushless ESC
Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles) creates an ideal power solution to 1/10th scale top touring car, Pan car and buggy racing.
The aluminum casing and reticular heat sink combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.
The XR10 Pro ESC features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. The built-in switch mode BEC with a maximum output of 8A and voltage adjustable between 6V and 7.4V allows the user to use various high voltage servos.
This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows the user to analyze the recorded data via a the LCD program box or WiFi module after each use.
HobbyWing XeRun XR10 PRO Features:
· High Power Output
· Special Design for Top Racing
· Programming / Upgrading / Data reading wirelessly
· Adjustable Throttle & Brake PWM Frequencies
· Efficient Heat Dissipating System
· High current/voltage BEC
· Separate Programming/Fan Port
· Advanced and Secure Electronic Switch
· Innovative data-logging Function
HobbyWing XeRun XR10 PRO Specifications:
2-3S LiPo/4-9 Cell NiMH
Fan Voltage Range
37.5x30.9x31.6mm (w/Fan & Fan Shroud)
95g (w/ Wires)
Hobbywing XeRun V10 G2 4.5T Sensored Brushless Motor
The exterior design of V10 G2 motor is inspired by the wheel design of super sports car. The gap between the motor rotor and motor housing is extremely small due to precision machining and no copper sheet is needed avoids the motor failure caused by the wear of the copper sheet.
The motor housing is made from hard anodized aluminum, motor windings are wound from double insulated wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets and the imported bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn will guarantee strength, outstanding performance, high durability and smoothness of the motor.
The built-in Hall sensor adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand. The output performance of this motor has an efficiency of up to 90%. In the same load condition, V10 G2 motor has the higher efficiency but lower temperature than the V10 motor.
Hobbywing XeRun V10 G2 4.5T Features:
· Linear & Smooth Control
· Solid Construction
· Adjustable Mechanical Timing
· High Efficiency
· Re-buildable Case Design
· IFMAR, ROAR, JMRCA Certified
Hobbywing XeRun V10 G2 4.5T Specifications:
No-load Current (A)
Max. Power Output (W)
Amp at the Max. Power Output (A)
Shaft Diameter (mm)
Found a better price? Let us know about it.
Recommend the selected product to your friends!
Product: Hobbywing XeRun XR10 PRO ESC & XeRun V10 G2 4.5T Motor Combo
Ing. Michal Bok
+420 724 658 937
Provozováno na systému Zoner inShop4., www.inshop.cz | Autor šablon Webecom s.r.o. webecom.cz