Carisma ARC-2 Brushed ESC (3s Compatible) with MPG-1 Program Box

Výrobce:
Carisma
Kategorie:
Kód produktu:
#CARI16115
Vaše cena:
53,90 €
Dostupnost:
dostupno dostatek, Odesíláme 30. 3.
Bude doručeno:
Česká republika31. 3.

Suitable for both On and Off Road use, the new easy to set up and program ARC-2 is just at home bashing in a fun RTR, as it is running Trails, Rock Crawling or fighting for pole position in a Stock Racing class at the local RC Club. It's the perfect upgrade to the stock units many RC Vehicles ship with, or as an affordable and versatile Brushed ESC in a custom build. The included MPG-1 Programming card makes fast mode and parameter changes possible while out on the trails or track side.

Descent Control mimics the electronic systems fitted to most modern 4x4's. It balances braking force against the RPM of the throttle allowing the vehicle to make a controlled descent down even the steepest of inclines using minimal throttle and the rigs own weight. You could call it 'Gravity Assist' as the rig slowly descends under full control.  In use, the Descent Control Force lessens in parity as throttle is increased, and increases in parity as it is reduced. When ascending up an incline this feature is also especially useful. At zero throttle the ARC-1 holds the rig in position at full brake acting like a hand brake. This then allows the driver time to plan their next move and pick the perfect line. As the throttle increases and the rig climbs, the brake effect lessens.

Features:
  • CNC Alum with matt black annodised casing for maximum heat dissipation
  • Waterproof & Dust-proof, suitable for all weather running in On or Off Road vehicles
  • 21 Fully Programmable Parameter items, Easy Setup using LED Program Card  
  • On power Descent Brake for Precision Motion Control & Downhill Finesse
  • Low Voltage Cut-Off (LVC) protection for LiPo Cells
  • Anti-Lock Brake (ABS) for On Road Cars
  • Over-heating/Thermal Protection
  • Fully Programmable Drag Brake
  • Throttle signal loss protection
  • Low RPM/ Stall Protection  
  • Over Voltage Protection
Specifications:
Switch Mode BECOutput voltage: 6V/7.4V (Programmable)
Max Output Current: 3A
Battery Compatibility2 or 3S LiPo (7.4v -11.1v) or 5-9 cell NiMH (7.2v - 10.8v)
Adjustable PWM Frequency1K/2K/4K/8K/16K/32K
Size41mm (L) x 33mm (W) x 22mm (H)
Motor connector4mm Bullet for Brushed motor
Battery connectorXT-60
Electrical Spec (Forward)Max instantaneous Current: 750A
Max continuous Current: 60A
Resistance:  0.001 ohm/phase
Electrical Spec (Reverse)Max instantaneous Current: 500A
Max continuous Current: 40A
Resistance: 0.0015 ohm/phase
PWM frequency (Programmable)1KHz, 2KHz,4KHz, 8KHz, 16KHz or 32KHz
Loading...