Ultimate Racing M-4RZ Competition Nitro Engine (Ceramic Bearings)

Ultimate Racing
Kód produktu:
Vaše cena:
339,50 €
dostupné 1 ks, Odesíláme 1. 7.
Bude doručeno:
Česká republika4. 7.

The Ultimate Engines M-4RZ with ceramic bearings is a 4 port engine with tuned crankshaft and represents the most powerful and fast 1/8 off-road engine of the Ultimate Engines line.  The Modelix Racing R&D team worked hard to develop an engine that takes what they learned from the M-5 and M-8 to further improve fuel mileage, reliability, and overall performance.  The M-4R has all what an engine needs to compete against other market leading engines, but at a price point that is well below what you normally will pay for a top quality race engine.

The M-4RZ is designed by Modelix Racing and built by Novarossi.

Cooling Head: The cooling head for the M-4RZ is new design first implemented in 2015.  The Modelix team specifically went with an oversized head to help keep the engine running cooler and improve performance when running at higher temperatures.  Although it is oversized, it’s drilled and milled to make it light and to keep the overall center of gravity of the engine low.

Another change from the previous design is the diameter of the central hole of the head where the glow plug fits is reduced.  For those that use temperature guns to measure engine temperature this will give you a more accurate reading because the gun will not factor the temperature of the plug in with the overall engine temperature since the plug is not easy to “see.”

Carburetor: The carburetor chosen for the M-4RZ engine is the plastic one from Novarossi.  It is a "reverse" type with a sliding throttle valve. It provides high idle stability, more precise tuning and higher mid/top range power.

Crankshaft: The exclusive 13mm turbo crankshaft is also designed by the Modelix team and is hand tuned and lightened to allow your engine to change RPM more quickly.  It is surprisingly strong and reliable thanks to the special steel material Modelix uses and the heat treatment process the crankshaft goes through.

Backplate: The shape of the rear cover reduces dead space, thereby optimizing the filling of the crankcase. The steel plate helps to reduce conrod-to-backplate friction which will increase the life of the conrod and improve engine efficiency and performance.

Sleeve: The 4 transfer port sleeve is the best option to provide high, but very linear, power through the entire RPM range and yet still keep the fuel consumption rate low.

Piston & Conrod: The R7 conrod is machined from a super light aluminum that is checked ultrasonically. The unique shape of the R7 rod creates less turbulence inside the engine.

The material of the piston is chosen for its excellent strength to weight properties.  The flat shape of the top of the piston improves the efficiency of the engine.  Each piston is coupled with the sleeve to get the best compression and longevity.  This operation is done by hand, one by one, and checked by a precision measurement tool.

Turbo Plug Underhead Button: The combustion chamber has a special shape to increase performance during combustion. The sealing o-ring prevents vibration and also protects the assembled sleeve and crankcase from external dust.  This head button is for turbo plugs, not standard plugs.  It’s marked with an arrow to make sure you always assemble it correctly.

Ceramic Bearings: The ceramic bearings in the M-4RZ have several advantages over steel bearings.  The advantages include lower weight,  increased corrosion and wear resistance, and reduced friction and vibration.  In addition, ceramic bearings allow your engine to run at a higher RPM.