Himoto 1/5 4WD Raptor 5XB Buggy

The four wheel drive giant Buggy model is powered by a 32cc petrol engine with a pull starter.

Thanks to this drive, operation is completely trouble-free and undemanding. Just fill the 700ml tank with Natural 95 s petrol
oil admixture, pull the starter cord and you can enjoy tens of minutes of thrilling driving with these colossi.

The design of the chassis is very similar to models of smaller scales, only the construction and the materials used are subject to the fact that the almost 17 kg model can withstand even the most demanding conditions. The 32cc engine drives all four wheels through a centrifugal clutch using a transfer case and a steel permanent gear, which is completely unique in this category.

The basis of the chassis is a chassis made of 4 mm duralumin 6061T6, which guarantees sufficient strength. This is also helped by the front strut. The front and rear axles are equipped with planetary differentials with steel gears. The wheels are independently suspended on the lower trapezoidal arms and on the upper triangular arms. These, like wheel suspensions, differential housings, bumpers, etc., are made of very strong plastic filled with glass fibers. The robustness and design of these parts is solved with regard to the weight of the model. All gears, half-axles and their carriers are dimensioned in the same way.

All connecting rods (arm bolts, etc.) are steel with a diameter of 7 mm, equipped with a right-left thread and a hexagon, which enables convenient and precise adjustment of the chassis geometry. Four all-metal oil shock absorbers with coil springs take care of the suspension. Spring preload is easily adjusted using a fine thread nut. Blue anodized

shock absorber holders (antlers) are made of 8 mm thick!!! duralumin. The wheel rims are equipped with a screwed collar that secures the tire without the need for gluing. The low-profile tires have a proven "buggy" pattern and have a diameter of 178mm. It takes power to stop this model safely and that is why a double disc brake is used.

The engine is powered by a 32cc gasoline engine equipped with a pull starter, centrifugal clutch, Walbro membrane carburetor "á la" and a button for turning off the engine. For easier starting, the carburetor is equipped with a choke and a hand pump for sucking fuel from the tank. It has a volume of 700cc. A large-volume air filter with a double insert takes care of the supply of fresh air to the engine.

A modern MT-303 digital RC kit operating in the 2.4Ghz band is used for control.

Features:

• Fully assembled buggy model.
• Equipped with a 32 cc internal combustion engine.
• Equipped with 2.4GHz RC kit MT-303.
• Equipped with steering and throttle servo.
• Receiver accumulator incl. mains charger in the package.